Lcd Functions Description - Analog way Centrix CTX8022 Manuel Utilisateur

Chapter 6 : EVENTIX™ & REMOTE KEYPAD LCD SCREEN DESCRIPTION (continued)

6-5. LCD FUNCTIONS DESCRIPTION

1 [MODE] + ENTER.
Select a switcher mode between:
• [mixer mode]: Set the device in MIXER mode.
• [matrix mode]: Set the device in MATRIX mode.
2 [INPUT] + ENTER.
2-1 [input type] + ENTER.
Select an input with
Select the input signal type with
• [SDTV Composite]
• [SDTV S.VIDEO]
• [SDTV YUV]
• [SDTV RGBS TTL]
• [SDTV RGB SOG]
• [Computer DVI]: Optional DVI input.
Then for [SDTV Composite], and [SDTV S.VIDEO], select the video standard with
• [NTSC / PAL / SECAM]: automatic NTSC, PAL, and SECAM standard detection.
• [NTSC]: NTSC standard only.
• [SECAM]: SECAM standard only.
2-2 [used input] + ENTER.
Select an input and then select an item with
• [used]: A signal is connected to the input.
• [unused]: No signal is connected to the input. The input is unused.
2-3 [H sync load] + ENTER.
Select for each input the load of the H Sync. with
2-4 [VCR mode] + ENTER.
This function allows improving the image contour of low quality VHS tapes. Select [on] with ENTER.
2-5 [synchronized] + ENTER.
This function allows defining the sources which are synchronized together (external genlock). The synchronized
sources can be seamless switched between themselves during an effect (into a PIP for example). This switching
mode is called VIS (Vertical Interval Switching).
2-6 [input status] + ENTER.
Indicates the status of the selected input.
3 [OUTPUT] + ENTER.
3-1 [output format] + ENTER.
Select one of the following output formats with
• [WVGA:852x480]
• [SVGA:800x600]
• [XGA:1024x768]
• [SXGA:1280x1024]
NOTE: For fixed pixels display devices (DMD, LCD, PLASMA...), always select the output format
corresponding to the native resolution of the display device. Thus, the display device will not have to
scale the image and the result will be better.
3-2 [output rate] + ENTER.
Select an output rate between:
• [internal 50Hz]: The output frame is generated at 50 Hz by the device.
• [internal 60Hz]: The output frame is generated at 60 Hz by the device.
• [internal 72Hz]: The output frame is generated at 72 Hz by the device.
• [internal 75Hz]: The output frame is generated at 75 Hz by the device.
• [follow]:
PAGE 48
+ ENTER.
+ ENTER between:
The output frame is synchronized onto one input signal. Select the needed input with
and validate with ENTER.
• [SDTV RGBS ana.]
• [Computer SOG]
• [Computer HV/C]
• [HDTV]: HDTV input format (720p and 1080i).
• [SDTV SDI]: optional SDI input.
• [PAL]: PAL standard only.
• [B & W 50/60 Hz]: Black and White standard.
+ ENTER between:
+ ENTER.
+ ENTER.
• [SXGA+:1400x1050]
• [D-ILA - 4/3]
• [D-ILA - 16/9]
• [HDTV 720p]
CENTRIX™ & EVENTIX™
+ ENTER between: