Analog way Centrix CTX8022 Manuel Utilisateur page 57

CENTRIX™ & EVENTIX™
6-5. LCD FUNCTIONS DESCRIPTION (continued)
9-6-2 [fade frame] + ENTER.
This function allows switching by a fading image (instead of a color). Then adjust the duration of the
transition.
9-6-3 [clean cut] + ENTER.
This function allows a clean switching thanks to a fast freeze of the displayed source.
9-7 [tally] + ENTER.
First select a tally output with
Then select an input for this tally output with
9-8 [key brightness] + ENTER.
Allows adjusting the key brightness.
9-9 [key locking] + ENTER.
Select an item with
• [menus]: Locks/unlocks the LCD CONTROL switches.
• [input]: Locks/unlocks the INPUT SELECTION and FREEZE switches.
• [all]: Locks/unlocks all the front panel switches.
NOTE: To unlock presses simultaneously on ENTER and EXIT.
• [autolock]: Allows selecting an input only if a signal is connected.
9-10 [erase all mem] + ENTER.
This function allows erasing all the NON-volatile image memories. Select [YES] and validate with ENTER.
9-11 [languages] + ENTER.
9-12 [demo mode] + ENTER.
This function allows playing a sequence of effect. Select [YES] and validate with ENTER.
9-13 [default value] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER. Then switch OFF and ON the device.
FUNCTION
1 MODE
2-1 input type
2-2 used Inputs
2-3 H Sync Load
2-4 VCR mode
3-1 output format
3-2 output rate
3-3 output sync
3-4 type of screen
3-5 test pattern
4-2-1 horizontal position
4-2-2 vertical position
4-2-3 horizontal size
4-2-4 vertical size
4-3 aspect ratio
4-4 brightness (video)
4-4 black level (computer)
4-5 contrast (video)
4-5 color (computer)
4-6 color (video)
4-6-1 clock (computer)
4-6-2 phase (computer)
4-7 hue
4-8 u/overscan
4-9 sharpness
Chapter 6 : EVENTIX™ & REMOTE KEYPAD LCD SCREEN DESCRIPTION (continued)
+ ENTER.
and change the mode with ENTER.
POSITION
mixer mode
computer HV/C
used
Hi-Z
OFF
XGA:1024x768
internal 50Hz
H & V
4/3
no pattern
128
128
128
128
4/3
128
128
128
R = 128, G = 128, B= 128
128
0
0
128
overscan
0
+ ENTER.
FUNCTION
6-1 USER 1 key
6-2 USER 2 key
6-3 USER 3 key
6-4 USER 4 key
7-1 master volume
7-2 audio mode
7-3 audio source
7-4 audio level.
7-5 audio balance.
8-1 master volume
8-2 audio mode
8-3 audio source
8-4 audio level.
8-5 audio balance.
9-5 2:2 pull down
9-6 transition
9-9 key locking
9-12 demo mode
POSITION
Fading (2s).
Title (holding).
Shadow title (holding).
H. WIPE: From left (2).
191
stereo
auto follow
48
32
191
stereo
auto follow
48
32
auto
fade color
all off
no
PAGE 57