Analog way Centrix CTX8022 Manuel Utilisateur page 35

CENTRIX™ & EVENTIX™
3-3. OPERATING WITH THE REMOTE KEYPAD (continued)
3-3-2. OPERATING IN MIXER MODE (continued)
• EXAMPLES OF TRANSITION
PIP effect:
The PIP effect allows to insert an image into another one.
• Press the PIP key, then make all the needed adjustments (duration, size, position...) with
ENTER.
• Press the TAKE key to activate the effect (ACTION 1): the PREVIEW image is inserted into the MAIN image.
NOTE: • You can change the image in the PIP (PREVIEW image) by selecting another input of the PREVIEW
output (ACTION 2): Press the PREVIEW (OUTPUT SELECT) key and select the needed input (the
transition operates with a fading to black)
• You can change the background image (MAIN image) by selecting another input of the MAIN output
(ACTION 3): Press the MAIN (OUTPUT SELECT) key and select the needed input (the transition
operates with a fading to black).
• To remove the PIP effect, press the TAKE key.
Title effect (or shadow title):
The TITLE effect allows to display a text onto the MAIN image. For a better readability you also can display a
shadow bar onto your text.
• Create the text to display with the computer connected to the CENTRIX
software like PowerPoint® (text in white onto a black background).
• Display on the MAIN output the source to titling, then pre-select the source used for create the text: the image
appears on the PREVIEW output.
• Assign the TITLE effect to one of the USER keys: Press one USER key, select title or shadow title with
and validate with ENTER, then select the duration with
• Press the TAKE key to activate the effect (ACTION 1): the text is now displayed onto the image of the MAIN
output.
NOTE: You can change the background image (MAIN image) by selecting another input of the MAIN output
(ACTION 2): Press the MAIN output select key and select the needed input (the transition operates with a
fading to black). To remove the TITLE effect, press the TAKE key (ACTION 3).
Wipe transition:
• Assign a WIPE to one of the USER keys: Press one USER key, select a WIPE with the knob
with ENTER (for example: hor wipe > from left), then select the duration with
• Press the TAKE key to activate the transition: the PREVIEW image appears onto the MAIN display with a wipe
transition.
• VIDEO OUTPUT ADJUSTMENTS
Select the output standard (OUTPUT menu > video output > video standard > NTSC or PAL).
Select the video "output rate" (OUTPUT menu > video output > output rate >...).
Select the zoom mode (OUTPUT menu > video output > U/Over scan > underscan or overscan).
Select a level of anti-flicker (OUTPUT menu > video output > flicker adj. >...).
• AUDIO ADJUSTMENTS
For each AUDIO output, make the following adjustment.
Adjust the master volume (AUDIO xxxx > master volume).
Select the mono or stereo audio mode (AUDIO xxxx > audio mode > mono or stereo)
Select the auto follow or breakaway audio mode (AUDIO > audio source > auto follow or input # x):
- auto follow = the audio switching follows automatically the video switching.
- breakaway = the selected audio input is permanently diffused.
For each audio input, adjust the level (AUDIO xxxx > audio level) and the balance (AUDIO xxxx > audio
balance).
IMPORTANT: If the auxiliary audio input (AUX) is used, don't forget to activate it with the LCD menu (AUDIO
See Figure 21: PIP effect. Page 20.
See Figure 22: Title effect. Page 21.
xxxx > AUX input > ON).
and validate with ENTER.
See Figures Page 22.
Chapter 3 : OPERATING MODE (continued)
and validate with
™ ™
/ EVENTIX thanks to a drawing
and validate with ENTER.
and validate
PAGE 35