Chapter 4 : Lcd Screen Description; Device Status; Output Status - Analog way OCTRO-QUATTRO OTR401 Manuel Utilisateur

Chapter 4 : LCD SCREEN DESCRIPTION

4-1. INTRODUCTION
The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the OCTO-QUATTRO
• The CONTROL MODE allows selecting and adjusting the parameters of the OCTO-QUATTRO
4-2. CONTROL BUTTONS
The LCD screen is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:
4-3. STATUS MODE
When switching ON, the LCD SCREEN shows the product's name and reference as follows:
DEVICE NAME
DEVICE VERSION
OUTPUT RATE.
OUTPUT FORMAT.
OUTPUT FRAME RATE.
SELECTED INPUT (DISPLAYED).
INPUT FORMAT OR INPUT STANDARD.
INPUT LINE / FRAME FREQUENCY.
PAGE 12
• In the STATUS MODE, turns this knob to adjust the Master volume.
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, press this button to display the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to display the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
OCTO-QUATTRO
Version _._
OUTPUT
intern rate
INPUT # 1
SVGA 37.9 K / 60Hz
XGA
60 Hz
OCTO-QUATTRO™
™
.
™
.

DEVICE STATUS

OUTPUT STATUS

INPUT STATUS