Chapter 2 : Connecting; Connecting The Centrix ™ / Eventix - Analog way Centrix CTX8022 Manuel Utilisateur

CENTRIX™ & EVENTIX™

Chapter 2 : CONNECTING

2-1. CONNECTING THE CENTRIX
Turn OFF all of your equipment before connecting.
Connect your computers (PC, MAC, workstation) and your video sources to the inputs (1 to 8) of the device.
Connect your MAIN display device (data projector, plasma screen...) to the "MAIN" output.
Connect your control monitors to the PREVIEW & MAIN outputs.
Connect the AC power supply cord to the device and to a power outlet.
Turn ON the projector, the local monitors, the device (rear panel switch) and then all of your input sources.
2-1-1. UNIVERSAL COMPUTER & VIDEO INPUTS
The UNIVERSAL INPUTS can accept both COMPUTER sources (RGBHV, RGBS, and RGsB (SOG) signals),
standard TV/VIDEO sources (Composite video, S.VIDEO, Component (YUV), RGBS & RGsB (SOG)), and HDTV
sources (720p & 1080i).
COMPUTER SOURCES:
The device accepts COMPUTER signals (RGBHV, RGB/S, and RGsB) on its 8 inputs. The inputs #1 to #4 are
provided with a 5x BNC female connectors. The inputs #5 to #8 are provided with a HD15 female connector.
NOTE: For RGBS signals connect the Sync cable to the H/C sync BNC connector.
™ ™
/ EVENTIX
Figure 4
Figure 5
PAGE 11