Analog way Centrix CTX8022 Manuel Utilisateur page 125

CENTRIX™ & EVENTIX™
COMMAND RESPONSE
COMMANDE RÉPONSE
FRAME & LOGOS COMMANDS (continued) / COMMANDES DU MENU LOGOS & FRAME (suite)
lM lmod
lX lsta
lA lpga
lB lpgb
lC lcur
lD ldys
lU lhcp
lu lvcp
lW lhsa
lS lvsa
lH lhpa
lh lhpb
lV lvpa
lv lvpb
lP lpxa
lL llna
lp lpxb
ll llnb
lT ltya
lt ltyb
lO lofa
lo lofb
lR lsto
lr labt
lZ LPTP
LE LLEV
lE LEMP
Lb LBKC
Ld LLD
Lf LFD
NOTE: To store a logo from the PREVIEW display you should:
Select the logo recording mode with the lM command (1lM).
Adjust the position and size of the logo storing area with the lU, lu, lH and lh commands.
Adjust the luma key level (with LE command) and the background color (with Lb command).
Select a logo memory with the lC command and make a store with lR command (1lR).
To store a frame from the PREVIEW display you should:
Select the frame recording mode with the lM command (2lM), and make a store with the lR command (1lR).
NOTE: To assign a logo/frame to an input on the PREVIEW display you should:
Select the assignment mode with the lM command (0lM).
Select a stored logo/frame with lA, or lB commands.
Adjust the horizontal & vertical position of the logo with the lH, lh, lV & lv commands.
COMMAND DESCRIPTION
DESCRIPTION DE LA COMMANDE
Frame/logo mode.
Status of the logo programmer
Logo 1 & frame assignment.
Logo 2 & frame assignment.
• In logo recording mode: Number of
the logo to be store (3 to 10).
• In frame recording mode: Number of
the frame to be store (1 or 2).
• In erase mode: number of the logo to
be erase (0 = erase all).
Display logo (according to PCH)
Horiz. position of the logo storing area. Rd/Wr
Vert. position of the logo storing area.
Horizontal size of the logo storing area. Rd/Wr
Vertical size of the logo storing area.
Horizontal position of the logo 1.
Horizontal position of the logo 2.
Vertical position of the logo 1.
Vertical position of the logo 2.
Pixels number in a line of the logo 1.
Lines number in a logo 1.
Pixels number in a line of the logo 2.
Lines number in a logo 2.
Logo 1 type.
Logo 2 type.
Output format during the logo1 storing. Rd
Output format during the logo2 storing. Rd
• In recording mode: frame/logo storing.
• In erase mode: frame/logo erasing.
Stop the frame storing.
Logo transparency
Luma key level.
Status of the frame/logo memories.
(according to lcur)
Background color.
Fade logo duration (0.01 second step).
Fade frame duration (0.1 second step).
TYPE
MIN MAX
0 = use & assignment mode.
1 = logo recording mode.
Rd/Wr 0 3
2 = frame recording mode.
3 = erasing mode.
0 = free.
1 = logo/frame in recalling process.
Rd 0 4 2 = logo/frame in storing process.
3 = output format incompatible with the logo.
4 = logo/frame in erasing process.
Rd/Wr 0 10 0 = none
3 = logo 1
Rd/Wr 0 10
0 = no logo
Rd/Wr 0 10 2 = frame 2
4 = logo 2...................
Rd/Wr 0 1 0 = Display OFF
0 255
Rd/Wr 0 255
5 255 5 = 3%
Rd/Wr 5 255 5 = 3%
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd 0 65535
These 2 commands allow to calculate the
duration of the storing.
Rd 0 65535
0 65535
Rd
These 2 commands allow to calculate the
duration of the storing.
Rd 0 65535
Rd/Wr 0 1
0 = frame
Rd/Wr 0 1
0 11
Identical as F command.
0 11
Rd 0 1 1 = STORE or ERASE (automatic reset).
Rd/Wr 0 1 1 = stop the frame storing (automatic reset).
Rd/Wr 0 15 0 = mini
Rd/Wr 0 255
0 = logo/frame memorized.
Rd 0 1
1 = empty memory.
Rd/Wr 0 7
Rd/Wr 15 255 15 = 0.15 second
Rd/Wr 5 50 5 = 0.1 second
APPENDIX A / ANNEXE A
VALUE /VALEUR
DESCRIPTION
1 = frame 1 2 = frame 2
4 = logo 2........ 10 = logo 8
1 = frame 1
3 = logo 1
10 = logo 8
1 = Display ON
255 = 100%
255 = 100%
1= logo.
15 = maxi
255 = 2.5 seconds
50 = 5 seconds
PAGE 125