Analog way Centrix CTX8022 Manuel Utilisateur page 128

APPENDIX A / ANNEXE A
COMMAND RESPONSE
COMMANDE RÉPONSE
VIDEO OUTPUTS COMMANDS (OPT-iX-SDTVD1 option) / COMMANDES DE LA SORTIE VIDÉO (option OPT-iX-SDTVD1)
kR SREQ
kT SSTA
kM SFAM
kQ SFRQ
kC SVCR
kJ STRK
kA SAFK
kO SOVR
kD SSTD
kD SSTD
kK SK_
kS SS_
kV SV_
kF SF_
kW SHPO
kX SVPO
kY SHSZ
kZ SVSZ
SOFT-EDGE BLENDING COMMANDS (CBD-UP option) / COMMANDES DE SOFT-EDGE BLENDING (option CBD-UP)
eS EDGS
eA EDGA
eP EFA
eC PEDG
eT EDGT
eV EDGV
LK LUTC
K L
eJ EDGR
eK EDGG
eL EDGB
eH EDGH
el EDGI
NOTE: (M) = MAIN output (sortie MAIN).
(P) = PREVIEW output (sortie PREVIEW).
PAGE 128
COMMAND DESCRIPTION
DESCRIPTION DE LA COMMANDE
Input reference for the frame rate of the
video output.
Status of the frame rate reference.
Standard input signal of the reference.
Frame rate of the input reference (in
hundredth of Hz)
Input stability.
Color tracking
Anti-flicker level.
Under/overscan mode.
Output video standard
Output video standard
"SK" firmware version.
"SS" firmware version.
"SV" firmware version.
"SF" firmware version.
Horizontal position.
Vertical position.
Horizontal size.
Vertical position.
Covering size.
Device position in the screen.
Effect position in the screen.
Extended input selection (works with
PC command).
Softedge type.
Softedge activation.
LUT loading control.
-Values to set in the LUT (if LUTC=3)
-Softedge curve selection (if LUTC=9
or 10).
Black level: red adjustment.
Black level: green adjustment.
Black level: bleu adjustment.
Black area: right adjustment
Black area: left adjustment
TYPE
MIN MAX
Rd/Wr 0 8
0 = internal rate
1= input #1................... 8 = input #8.
Rd 0 8
0 29 Identical as IF command.
Rd
0 65535
Rd
Rd/Wr 0 1 0 = DVD
Rd/Wr 0 255
Rd/Wr 0 7
Rd/Wr 0 1 0 = underscan
0 = NTSC
Rd/Wr 0 2
2 = NTSC J
0 = NTSC / 720p 59.94 1 = PAL / 720p 60
2 = NTSC J / 1035i 59.94
Rd/Wr 0 6
3 = 1035i 60
5 = 1080i 59.94
Rd 0 65535
0 65535
Rd
Rd 0 65535
Rd 0 65535
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 1
bits 0 to 3: device position.
Rd/Wr 1 255
bits 4 to 7: number of devices.
bits 0 to 3: device position.
bits 4 to 7: number of devices.
Rd/Wr 1 1 0 = not extended
0 = horizontal
Rd/Wr 1 1
0 = inactive
Rd/Wr 1 1
1 = reset the LUT.
3 = LUT loading (softedge curve).
Rd/Wr 1 10 5 = linear softedge.
9 = softedge writing LUT selection.
10 = softedge displayed LUT selection.
if LUTC = 3: 0 to 255.
Rd/Wr 0 255 if LUTC = 9 or 10: 0 or 1.
Rd/Wr 0 7
Rd/Wr 0 7
Rd/Wr 0 7
Rd/Wr 0 2047
Rd/Wr 0 2047
Rd/Wr = Read and write command / Commande de lecture et d'écriture.
Rd = Read only command / Commande de lecture uniquement.
CENTRIX™ & EVENTIX™
VALUE /VALEUR
DESCRIPTION
1 = VCR
1 = overscan
1 = PAL
4 = 1080i 50
6 = 1080i 60
1 = extended.
1 = vertical.
1 = active.