Horizon Fitness BT5.1 Manuel D'utilisation page 39

BASIC TROUBLESHOOTING
PROBLEM: The console does not light up.
SOLUTION: Verify the following:
• The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.
• The correct power cord is being used. Only use the power cord included or provided by Your local dealer.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• Unplug power cord, remove the console and check that all connections to the console are secure and not damaged or pinched.
PROBLEM: The console lights up but the Distance/Watts/RPMs do not count.
SOLUTION: Verify the following:
• Unplug power cord, remove the console and check that all connections to the console are secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or damaged.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Verify the following:
• The correct power cord is being used. Only use the power cord provided or authorized by Your local dealer.
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
PROBLEM: The exercise bike makes a squeaking or chirping noise.
SOLUTION: Verify the following:
• The exercise bike is on a level surface.
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
HZ19_OM_BT5.1_II_090419'_A.indd 39
39
2019/9/4 上午10:45