Publicité
Les langues disponibles
Les langues disponibles
4 Press DAILY 1 or DAILY 2.
"ON" and the timer indication appear
and the hour digits flash in the display.
flashing
5 ress or
(CURSOR CONTROL) to
set the hour you want the system to turn
on, then press ENTER/NEXT.
Set the minutes in the same way. "OFF"
appears and the hour digits flash in the
display.
flashing
6 Press < or > to set the hour you want
the svstem to turn off then press
ENTER/NEXT.
Set the minutes in the same way.
7 Press <4 or > to select a sound source.
The display changes as follows:
TUNER <-> CD <-> TAPE
flashing
8 Press ENTER/NEXT.
The preset items appear in order in the
display.
9 Press SYSTEM POWER to tum off the
system.
The power will turn on at the preset
time and the music will play with the
volume you have adjusted.
At the turn-off time, the power will go
off again.
To change the preset timer settings
Start over from step 1.
To check the preset timer settings
1 Press DAILY 1 or DAILY 2 which ever
you have set once.
2 "TIMER OFF" appears in the display.
3
Press DAILY 1 or DAILY 2 again.
The preset items appear in order in the
display, then "DAILY 1 ON" or "DAILY
2 ON" appears in the display.
To change the timer
Press the desired timer button.
To cancel the timer
1 Press DAILY 1 or DAILY 2 which ever
you have set once.
2 "TIMER OFF" appears in the display.
Notes
¢ You cannot set DAILY 1 and DAILY 2 at
the same time.
* You cannot set timer if the timer on and
off times are the same.
¢ When you set the sleep timer, daily timer
does not turn on until the system turns off
by the sleep timer.
¢ You cannot activate daily timer and
recording timer at the same time.
fers i oa
No
Timer-Recording
Radio Programmes
You can set the timer to record the radio.
This timer works only once for each setting.
The volume level is automatically set to the
minimum.
Make sure the clock has been set correctly
and preset the station beforehand. (See
"Presetting Radio Stations".)
SYSTEM
POWER-ON
1 Press TUNER/BAND repeatedly until
the band you want appears in the
display.
2 Press TUNING MODE repeatedly until
"PRESET" appears in the display.
3 Press TUNING +/- button (or 08) / (30
on the remote) to tune in a preset
station.
4 Press TIMER SET.
"SELECT" and "TIMER" appears
alternately in the display.
5 Press REC.
"ON"
appears and the hour digits flash
in the display.
flashing
6 Set the hour you want to start recording
by pressing < and »
(CURSOR
CONTROL), then press ENTER/NEXT.
Set the minutes in the same way.
"OFF" appears and the hour digits flash
again.
7 set the hour you want to stop recording
by pressing 4 and >
(CURSOR
Ke
CONTROL), then press ENTER/NEXT.
25
Set the minutes in the same way.
The preset items appear in order in the
display.
& insert a tape in deck B with the side you
want to record facing forward.
Recording always starts from the front
side. If necessary, select the direction
mode. You can use TYPE I (normal) or
TYPE I (CrO2) tapes.
9 Press SYSTEM POWER to turn off the
system.
The power will turn on at the preset
time and the recording will start with
the minimum volume level
automatically.
At the turn-off time, the power will go
tine
Turn:
off again.
To cancel the timer settings
Press REC so that "TIMER REC"
disappears from the display. Press REC
again to activate the timer.
To check the timer settings
Press REC twice in succession.
To change the timer settings
Repeat step 1 to 9.
Notes
* The band and station will be recalled as
you have set them, but the recording does
not start if the systerm power is on.
* You cannot activate recording timer and
daily timer at the same time.
Chapter 6: Additional Features
Publicité
