Publicité
Les langues disponibles
Les langues disponibles
Chapter 4:
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length (tape select
edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (programme
edit)
Recording from the Radio
Recording from Another
Tape (dubbing)
eee
ea
Playing a Tape
You can use TYPE I (normal) and TYPE II
(CrOz) tapes. When you insert a tape, the
deck detects the tape type automaiicaily.
SYSTEM
POWER>ON
DOLBY
1 Press FUNCTION repeatedly until
"TAPE" appears in the display.
2 Press & EJECT to open the tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
3 Press DIRECTION to choose single-side,
dual-side, or relay play.
The DIRECTION setting affects both
decks.
Press DIRECTION to
To play
select
One side of the
=
tape
Both sides*
cS)
Both decks in
RELAY
succession**
* The deck stops automatically after
repeating the sequence five times.
"See "To play both decks in succession
(relay play)."
4 Press [> (to play the front side) or <1
(to play the reverse side).
The tape starts playing.
To
Press
Stop play
Ey
Pause (deck B
ag
only)
Resume play after
OJlor <Jor
pause
[>> for front side a4
for reverse side
<K1 for front side D>
Fast forward
Rewind
for reverse side
Remove the
& EJECT
cassette
To control the remote
1 Press DECK A [> or DECK B © to
play the front side and press DECK A
(> or DECK B © again to play the
reverse.
2
Press the desired operation button.
ecks In succession
(relay play)
Relay play is according to the following
sequence. When the reverse side of the tape
in deck B finishes playing, the sequence
continues four more times.
To nlayv both
Oo play
Dot
Deck A
Deck A
|
(Front side)
(Reverse side)
Deck B
Deck B
(Reverse side)
(Front side)
1 Press & EJECT and insert recorded
tapes in both decks.
2
Press DIRECTION repeatedly until
"RELAY" appears in the display.
3
Press <J or & on either deck. To stop
relay play, press C1.
To cancel relay
Press DIRECTION repeatedly until "=="
or "C)" appears in the display.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that
"DOLBY
NR B" appears in the display.
The settings affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation. "DOLBY" and the
double-D symbol DO are trademarks of
Dolby Laboratories Licensing
Corporation.
continue to next page >
Chapter 4: the Tape Player
15
Publicité
