Publicité
Les langues disponibles
Les langues disponibles
Chapter 3:
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
Tuning by Programme Type
(PTY) (LBT-N455 only)
Chapter 3: the Radio
Listening to the Radio
When you want to play a radio
programme, you can have the tuner
automatically scan the radio frequencies
and tune in the stations with clear signals.
This feature saves you time in searching for
stations with clear signals.
However, stations with weak signals may
be skipped by automatic tuning. Manually
tune in stations with weak signals.
SYSTEM
POWER~>ON
STEREO/
MONO
2
1
1 Press TUNER/BAND
repeatedly until
the band you want appears in the
display.
As you press this button, the band
changes as follows:
German and Italian models:
FM <—> AM
Other models:
FM —-> MW
—
LW
2 Press TUNING MODE repeatedly until
"AUTO" appears in the display.
3 Press TUNING +/-— buttons (or (33/03)
on the remote).
The tuner starts scanning radio
frequencies, and stops when it finds a
clear station. "TUNED" appears in the
display. "STEREO" also appears if the
FM station tuned in is broadcasting in
stereo.
Gir you don't want to listen to the
selected station, press TUNING +/- (or
(1/03 on the remote) buttons to restart
the scan.
When the desired station is not
tuned in
Automatic tuning may skip the stations
with weak signals and continue scanning
without a stop. In this case, tune in the
station manually.
1 Press TUNING MODE repeatedly until
"MANUAL" appears in the display.
2 Press TUNING +/- buttons repeatedly
until the desired station is tuned in.
To improve MW/LW (AM) broadcast
reception
Reorient the supplied AM loop aerial for
MW/LW (AM).
0
MW/LW (AM)
When an FM programme is not received
clearly
Press STEREO/MONDO on the unit so that
"MONO" appears in the display. There will
be no stereo effect, but the reception will
improve. Press STEREO/ MONO again to
restore the stereo effect.
One Touch Piay feature
Press TUNER/BAND (or TUNER/BAND
C> on the remote) when the power is off or
when you are listening to another sound
source.
You can listen to the last received station
without pressing any other buttons.
Note
When you listen to a sound source other
than the tuner, you can select the tuner by
pressing TUNER/ BAND (Automatic
Source Selection).
Fea
ee ra
ie Aa
Presetting Radio
Stations
You can store radio frequencies in the
tuner's memory to tune in your favourite
stations quickly. You can preset up to 20
EM stations, 10 MW
stations and 10 LW
stations (for German and Italian models: 20
FM stations and 10 AM stations) in any
order.
Publicité
