Sony LBT-N355 Mode D'emploi page 22

22
> continued
Press To get To get (from
(from MORE 5)
SELECT 5)
FILE1 ROCK GAME
FILE2 POPS DANCE
FILE3 JAZZ STADIUM
(PARTY*)
FILE 4 CLASSIC STUDIO (NIGHT"*)
FILES SALSA CHURCH
(MOVIE*)
"SUR 1 ttm) (SUR {{temnil) *)" or "SUR 2
{{1})} " appears in the display if you select
an effect with surround effects.
*For LBT-N355 only
To cancel the audio emphasis
Press EFFECT (or MUSIC MENU ON/OFF
on the remote) once so that the EFFECT
indicator and the selected preset setting
indicator go off.
"EFFECT OFF" appears in the display.
To change the equalizer display
Each time you hold down DISPLAY/
DEMO for a few seconds, the equalizer
display changes to show one of the
following displays:
Spectrum analyzer 1
cre Sunil Sillilt
SUS
eau
a
-
Spectrum analyzer 2
"3 125 250 500 1k fk tk BK 1Gkenen
4
Spectrum analyzer 3
Ha init
"53125 250 $00 tk dk tk Bk 16kinn
Graphic equalizer curve
: = Ey
on oe =o = =e
: = :
232725 «250 $00 tk 2k tk Sk 16k)
Chapter 5: Sound Adjustment
Adjusting the Audio
Emphasis
You can adjust the audio emphasis using
the following two functions:
¢ Graphic equalizer
¢ Surround effect
Adjusting the Sound
(graphic equalizer)
This feature lets you adjust the audio
emphasis by raising and lowering the level
of frequency ranges. Before operation, first
select the audio emphasis you want for
your basic sound.
SYSTEM
POWER>ON
1 Press one of 4, ®, A, or V (CURSOR
CONTROL).
The frequency range appears and the
level value flashes in the display.
2 Press < or ® to select the frequency
range you want to change.
Frequency range
Level value
3 Press & or ¥ to raise or lower the level
of the frequency range.
flashing
flashing
4 Repeat steps 2 and 3 to adjust other
frequency ranges and press ENTER/
NEXT.
Activating the Sound Field
(surround)
You can use the surtound effect without
connecting the surround speakers. Before
operation, first select the audio emphasis
you want for your basic sound.
SYSTEM | -
POWER*ON
DSP
(SURROUND
To turn on the surround effect
Press DSP (SURROUND),
"SUR 1 {{ltwmn}} (SUR (titan) *)" or "SUR 2
{{((am}}) " appears in the display.
To turn off the surround effect
Press DSP (SURROUND?) so that
"SURI ({tcom)}) (SUR ({[ttwnt)} *)" or "SUR 2
{iimt}]] " disappears from the display.
*LBT-N355 only
Adjusting the Sound Field
(LBT-N455 only)
Your stereo has been set to two
recommended surround effects.
Choose from among these two
programmed settings according to the type
of software you have.
SYSTEM
POWER?ON