Publicité
Les langues disponibles
Les langues disponibles
11. SECURING THE CHIMNEY
Parts Required:
1
x
Chimney Cap
1
x
Chimney
1
x
Chimney Gasket
3
x
Screw
Installation:
•
Dismantle three screws pre-installed on the right side of the
principal part.
•
Locate the chimney hole on the side of the principal part of
cylinder. Fix the chimney and chimney gasket on the side panel
with three screws, locked gaskets and gaskets from the outside.
Fasten the screw to the pre-mounted nut on the inner side of
the cylinder.
•
Make sure the air can pass through the chimney cap.
12. INSTALLING THE HOPPER HAND
Parts Required:
1 x Hopper Handle
1 x Main Body
Installation:
•
Remove the two screws from the hopper handle
•
Open the hopper lid
•
Secure the hopper handle onto the hopper with the removed
two screws.
13. INSTALLING THE LID HANDLE
Parts Required:
1 x Lid Handle
1 x Main Body
Installation:
•
Remove the two screws from the lid handle
•
Secure the lid handle onto the lid with the two removed
screws
9
Publicité
