Maytag PERFORMANCE Serie Guide D'utilisation Et D'entretien page 18

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The
preset settings provide the recommended fabric care for the selected cycle. See chart.
Cycles Soil Level Water Temp Spin Speed
(cycle time)
Whitest Whites Normal Hot/Cold Extra High
(1:35)
Heavy Duty Normal Hot/Cold Extra High
(1:10)
Normal/Casual Normal Warm/Cold High
(0:50)
Quick Wash I_ight Warm/Cold Extra High
(0:30)
Delicate Normal Cold/Cold I.ow
(0:40)
Handwash Normal Cold/Cold I.ow
(0:30)
Wool Normal Warm/Cold Medium
(0:30)
Soak Normal Warm/Cold No Spin
(0:30)
Clean Washer N/A N/A N/A
(1:05)
Rinse&Spin N/A Cold/Cold Extra High
(0:22)
Drain&Spin N/A N/A Extra High
(0:13)
To change the preset cycle settings
Press the selector of each setting until the desired setting illuminates.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear
various sounds when the door is locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there wiI[ be momentary pauses. You
wiI[ hear water spraying and splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
You can customize your wash by adding options to your cycle selections. You can add or
change an option after starting a cycle anytime before the selected option begins. Not all
options are available with all cycles.
power * car_ce normal _---_
casual delicate
heavy/ 10 _
duty/'/ quickwash
whitest !//
whites il
handwash
[ °xitreat ] _k ]WOO[
/clean washer
[s,gno, ....ff] s0ak ,
drain & spin sN. ,pin_-'_s_ loor locked
rinse
a press pause to unlock
start • 9ause
©
[ o,,ro,,o,o ]
[,, '°a° 1 ....
options
• See the "l.aundry Guide" for an overview of possible options for each Wash Cycle
selection.
• You can select more than one option for a cycle. Some options cannot be added to some
cycles; for example, Oxi treat cannot be added to the Quick Wash cycle.
• If an option is available with a selected cycle, the light for that option will illuminate
when selected.
• If an option is unavailable with a selected cycle, there will be a short tone, and the light
for that option will not illuminate when selected.
Oxi Treat
Use this option for heavily soiled loads that need pretreatment. Selecting this option will
ensure these products dispense during the wash cycle at the proper time for improving your
wash performance.
NOTES:
• Add oxygen-based stain fighter or color-safe bleach to the Oxi/color-safe bleach
compartment in the dispenser drawer.
• Use powdered detergent when using Oxi treat.
Signal On/Off
Use this option to turn the buzzer indicating the end of the cycle on or off.
Max Extract TM
Use this option to add an additional spin to any cycle to improve drying times for some heavy
fabrics by reducing excess wateb which may save energy.
18