Publicité
Les langues disponibles
Les langues disponibles
MPS750S-2 / TTPS750
Problem
2. Product does
not reach full
power
3. Unsatisfactory
cutting
performance
4. Excessive
vibration/noise
Recycling and disposal
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is function properly. Recycle the package afterwards.
Lubricant, oil and used oil as well as objects contaminated with oil, e.g. cleaning
cloths; do not belong with household waste. Dispose of oil- contaminated items
in accordance with the local guidelines and hand them in at recycling centres.
Old products are potentially recyclable under WEEE and do not, therefore, belong
in your household rubbish. You are requested to assist us and our contribution
to saving resources and protecting the environment by handing in this appliance
at an equipped collection centre (if there is one available).
3663602627661_MNL_IN_V02.indd 45
3663602627661_MNL_IN_V02.indd 45
Troubleshooting / Recycling and disposal
Possible cause
2.1. Extension cord not
suitable for operation with
this product
2.2. Power source (e.g.
generator) has too low
voltage
2.3. Air vents are blocked
3.1. Saw chain not tensioned
properly
3.2. Saw chain is dull/
damaged
4.1. Saw chain is dull/
damaged
4.2. Bolts/nuts are loosen
Solution
2.1. Use a proper extension
cord
2.2. Connect to another power
source
2.3. Clean the air vents
3.1. Tension properly
3.2. Sharpen or replace the
saw chain
4.1. Sharpen or replace the
saw chain
4.2. Tighten bolts/nuts
45
17-03-2023 16:52:54
17-03-2023 16:52:54
Publicité
