Publicité
Les langues disponibles
Les langues disponibles
MPS750S-2 / TTPS750
Follow the manufacturer's sharpening and maintenance
4.
instructions for the saw chain.Decreasing the depth
gauge height can lead to increased kickback.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low- noise operating
modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration
and noise exposure risks:
1.
Only use the product as intended by its design and these
instructions.
2.
Ensure that the product is in good condition and well
maintained.
3.
Use correct application tools for the product and ensure
they in good condition.
4.
Keep tight grip on the handles/grip surface.
5.
Maintain this product in accordance with these instructions
and keep it well lubricated (where appropriate).
6.
Plan your work schedule to spread any high vibration tool
use across a longer period of time.
The European Physical Agents (Vibration) Directive has been
brought in to help reduce hand arm vibration syndrome injuries to
users of product's with vibration emission. The directive requires
manufacturers and suppliers to provide indicative vibration
test results to enable users to make informed decisions as
to the period of time a product can be used safely on a daily
basis and the choice of tool. Further advice can be found at
www.hse.gov.uk
3663602627661_MNL_IN_V02.indd 11
3663602627661_MNL_IN_V02.indd 11
Safety information
17-03-2023 16:52:46
17-03-2023 16:52:46
11
Publicité
