Publicité
Les langues disponibles
Les langues disponibles
MPS750S-2 / TTPS750
4. Release the on/off switch (8) to switch the product off.
WARNING! The product will continue to work for some time even after the
motor has been switched off! Wait until it comes to a complete stop before
you put the product down!
Adjusting cutting head
1. Place the product on a stable, level surface with the angle adjusting button (11)
facing upward. We recommend laying a nonflammable sheet under the product.
2. Press the angle adjusting button (11), meanwhile rotate the working head anticlockwise
to the required working angle. Please note to align the mark
the angle adjusting button (11); and please make sure you hear a "click" when do
this adjustment or the angle adjusting button (11) bounces back, or else the working
head is not locked well. (Fig. 25,26)
2
1
Fig. 25
3663602627661_MNL_IN_V02.indd 31
3663602627661_MNL_IN_V02.indd 31
1
Fig. 24
11
2
1
2
8
0°
20°
40°
Fig. 26
Product functions
with the scale around
17-03-2023 16:52:51
17-03-2023 16:52:51
31
Publicité
