Titan MPS750S-2 Manuel D'instructions page 41

MPS750S-2 / TTPS750
3. To sharpen the chain proceed as follows:
• Use protective gloves.
• Ensure the chain is correctly tensioned.
• Engage the chain brake to lock the chain on the bar.
4. Use a chain file, whose diameter is 1.1 times the cutting tooth depth. Make sure
20 % of the file diameter is above the cutter's top plate.
NOTE: A file guide is available from most reputable tool merchants and is the
easiest way to hold the file at the correct position.
5. File at an angle perpendicular to the bar, and at an angle of 25° to the direction of
travel (Fig. 42).
3663602627661_MNL_IN_V02.indd 41 3663602627661_MNL_IN_V02.indd 41
Right-hand
Left-hand
cutter
Bumber drive
link
Tie strap
Fig. 41
Sharpening angle
25°
Left-hand
cutter
Saw chain
direction
Fig. 42
Care and maintenance
cutter
Bumber tie
strap
Saw chain
direction
File
direction
Outside
Inside
41
17-03-2023 16:52:53 17-03-2023 16:52:53