Titan MPS750S-2 Manuel D'instructions page 20

Before you start
4. Spread the saw chain (14) out with the cutting edges of the chain pointing in the
direction of rotation.
Slide the saw chain (14) into the groove around the guide bar (13). Ensure saw chain
(14) is installed in correct direction of rotation. (Fig .6)
WARNING! The direction of the saw chain 'cutters' must be same as indicated
by the symbol and arrow on the guide bar!
5. Align saw chain (14) and the guide bar (13) assembly with the drive sprocket (28)
and the mounting bolt (26). Lay the saw chain (14) around the drive sprocket (28)
and then lower the guide bar (13) to install it to the mounting bolt (26). (Fig.7)
20
3663602627661_MNL_IN_V02.indd 20 3663602627661_MNL_IN_V02.indd 20
12 19
Fig. 5
'Cutter'
Fig .6
MPS750S-2 / TTPS750
20
17-03-2023 16:52:48 17-03-2023 16:52:48