Publicité
Les langues disponibles
Les langues disponibles
Product functions
Intended use
This pole saw MPS750S-2 / TTPS750 is designated with a rated input of 750 Watts.
The product is intended for cutting limbs with a thickness of max. 180 mm. It must not
be used for cutting other materials, such as plastic, stone, metal or wood that contains
foreign objects. The product may only be used with the guide bar/saw chain combination
stated in these instructions. It is not permitted to use other types or sizes.
This product should not be used outside of domestic areas. This product is intended
for private domestic use only, not for any commercial trade use. It must not be used for
any purposes other than those described.
Adjusting pole length
1. Loosen the locking knob (23) by turning in a counter-clockwise direction and adjust
the pole extension (22) to the required length. (Fig. 23)
2. Tighten the locking knob (23) by turning in a clockwise direction. (Fig. 23)
Switching on/off
1. Ensure the saw chain (14) does not come into contact with anything before starting
the product.
2. Grip the product with both hands, your left hand holding the gripping surface (9) and
your right hand holding the rear handle (1). Do not start the product while handling
it with one hand.
3. Push the lock-off button (2) forward with your right thumb, then fully depress the on/
off switch (8) with your index fingers and hold it in this position.(Fig. 24)
30
3663602627661_MNL_IN_V02.indd 30
3663602627661_MNL_IN_V02.indd 30
2
3
1
23
22
Fig. 23
MPS750S-2 / TTPS750
17-03-2023 16:52:51
17-03-2023 16:52:51
Publicité
