Titan MPS750S-2 Manuel D'instructions page 42

Care and maintenance
6. File each tooth from the inside towards outside only. File one side of the chain first
than turn the saw around and repeat the process.
7. Sharpen each tooth equally by using the same number of strokes.
8. Keep all cutter lengths equal. Check the safety depth gauge height every 5
sharpenings. If the depth gauges are also trimmed it is essential that the original
profile be restored.
9. Use a depth gauge measuring instrument to check the height of the depth gauge.
Depth gauge measuring jigs are available from most reputable tool merchants
(Fig. 43).
Top plate
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description
Saw chain
Guide bar
Power cord
1. If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a safety hazard.
42
3663602627661_MNL_IN_V02.indd 42 3663602627661_MNL_IN_V02.indd 42
Cutting tip
File
position
Depth gauge
Cutter
length
Fig. 43
Model no. or Specification
Oregon 91PJ033X
Oregon 080SDEA041
MPS750S-2 / TTPS750
Depth gauge
setting 0.025"
17-03-2023 16:52:53 17-03-2023 16:52:53