Titan MPS750S-2 Manuel D'instructions page 43

MPS750S-2 / TTPS750
Plug replacement (for UK only)
If you need to replace the fitted plug, then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following
code: Blue - Neutral Brown - Live
As the colours of the wire in the mains lead of this product may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows. The wire,
which is coloured blue, must be connected to the terminal, which is marked with N or
coloured black. The wire, which is coloured brown, must be connected to the terminal,
which is marked L or coloured red.
Connect
Blue to N
(Neutral)
Outer sleeve
firmly clamped
WARNING! Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the correctly rated fuse.
If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to prevent
engaging into a socket.
Repair
This product does not contain any parts that can be repaired by the consumer. Contact
a qualified specialist to have it checked and repaired.
Storage
1. Clean the product as described above.
2. Store the product and its accessories in a dry, frost-free, well- ventilated place.
3663602627661_MNL_IN_V02.indd 43 3663602627661_MNL_IN_V02.indd 43
Care and maintenance
13 AMP fuse approved
to BS 1362
Brown L (Live)
Cable grip
43
17-03-2023 16:52:53 17-03-2023 16:52:53