Sabo 102-17H Mode D'emploi page 74

CONTROLS AND INSTRUMENTS
4.33 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving and dur-
ing cutting;
«B» = Transmission released: considerably reduces the effort required for
moving the machine by hand, with the engine turned off.
IMPORTANT
must be carried out only when the engine has stopped with the pedal (4.32)
at position "N".
All manuals and user guides at all-guides.com
To avoid damaging the transmission unit, this operation
ENG 19