Sabo 102-17H Mode D'emploi page 105

ENG 50
PROBLEM LIKELY CAUSE
– forward speed too high compared to
– collector channel is blocked
– cutting deck full of grass
14. Unusual vibrations – the blades are imbalanced
while working
– blades loose
– fixing bolts loose
15. With the engine – disengage lever in positon «B»
running, the machine
does not move when
the drive pedal is
➤
pressed. ( for
hydrostatic drive
models)
If problems continue after having carried out these operations, contact your
Dealer.
WARNING!
!
have the necessary equipment and the technical knowledge.
The guarantee is automatically revoked and the manufacturer declines
all responsibility for any repairs which are badly done.
All manuals and user guides at all-guides.com
height of grass (☛ 5.4.5)
(☛ 4.33)
Do not take on complicated repair work if you don't
TROUBLESHOOTING
SOLUTION
– reduce forward speed and/or raise the
cutting deck
– wait for the grass to dry
– remove the grass-catcher and empty
the collector channel (☛ 5.4.7)
– clean the cutting deck(☛ 5.4.10)
– balance or replace the damaged
blades (☛ 6.3.1)
– check that the blades are firmly fitted
(☛ 6.3.1) (remember the left-hand
thread of the right hand blade)
– check and tighten all the fixing bolts of
the engine and frame
– put into position «A»