5.10 Grounds container
The grounds container collects the used ground
coffee. It holds coffee grounds from approx. 30
brewings. A notification appears on the display
when the grounds container needs to be emptied.
Beverage dispensing is blocked if the grounds
container is not in place.
* Insert the cup grid into the grounds container.
* Remove the grounds container.
* Empty the grounds container.
The cup grid rests on the grounds container. Always
hold the grounds container tightly when emptying it.
* Reinsert the grounds container.
* Confirm the process on the display.
• Inserting without emptying causes
the grounds container to overfill. The
coffee machine is dirty. This can cause
consequential damages.
> Always empty the grounds container
before inserting it.
> If the grounds container cannot be
reinserted, check the shaft for remaining
coffee and remove it.
5.11 Drip tray
Danger of scalding
• Hot fluids could be in the drip tray.
> Carefully move the drip tray.
> Reinstall it carefully so that no unintended
water leakage occurs.
In coffee machines without an outlet connection, the
filling level sensor reports when the drip tray is full.
* Carefully remove the drip tray, empty it and
reinstall it.
SCClub short instructions
w C leaning the grounds container
page 40
IMPORTANT
Observe the Warranty chapter
w S ee instruction manual
CAUTION
Observe the Safety chapter
w f rom page 5
Clean the drip tray daily
Care w from page 3
31