Schaerer Coffee Club Notice D'utilisation page 79

4.3 Commissioning programme
* Switch on the coffee machine using the on/off
press switch.
The coffee machine switches on.
The commissioning programme starts.
* Follow all instructions on the display.
The commissioning programme proceeds
step-by-step through the further
commissioning process via the display.
> Follow the display messages.
• The set values can be changed after
commissioning.
Other instructions
• Connecting milk w Chapter 5.4 page 27
Once the commissioning process has been run in
its entirety and all necessary settings have been
made, the coffee machine restarts. Calibration is
performed automatically.
Risk of burns/
Danger of scalding
• Hot fluid comes out of the outlets during
beverage dispensing. The adjacent
surfaces and outlets get hot as well.
> Do not touch the area under the outlets
during beverage dispensing.
> Do not touch the outlets immediately after
dispensing.
24
IMPORTANT
Changing settings
wSetting
See instruction manual
CAUTION
Observe the Safety chapter
w f rom page 5
SCClub short instructions