Service And Maintenance - Altrad PRO 900 Manuel De L'opérateur

Table des Matières

Les langues disponibles

MAINTENANCE

The Belle Group Lightweight Trowels are designed to give many years of trouble free operation. It is, however, important that the

simple regular maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all

major maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.

Before any maintenance is carried out on the machine, switch off the engine. If working on a petrol engined machine, disconnect the

HT lead from the sparkplug.

Running In Period

When the Trowel is ﬁ rst used from new, the engine oil must be changed after the initial running in period.

(See Engine Manual for full details).

Routine Maintenance

Engine Oil

Check Level

Change

Air Filter

Check Condition

Clean / Replace

Spark Plug

Check / Clean

Cutout Switch Check

Belt Tension

Check

Blades

Check Condition

Replace

Oil/Fuel Type & Quantity - Spark Plug Type

Petrol

GX160

Engine

Petrol

EX17

Engine

Petrol

GX270

Engine

Gearbox

Note:

Check the gearbox oil at regular intervals and top-up when necessary. Make sure the oil is at the centre of the sight glass. To ﬁ nd

out what grade of oil should be used in the gearbox, please contact the Belle Group Warranty Department (+44 (0)1538 380000)

Grease Spider Arm Assembly prior to storage and at regular intervals.