Bosch Purion 200 Notice D'utilisation D'origine page 20

English – 8
Number Troubleshooting
680014
operating temperature. The charging of the
eBike battery is interrupted.
680016
As soon as the operating temperature re-
680017
turns to the permissible range, the charging
process will start again.
Critical errors
Follow the instructions in the table below if a critical error
occurs.
Number Instructions
6A0004 Remove the PowerMore battery and restart
your eBike.
If the problem persists, please contact your
specialist dealer.
890000 – Acknowledge the error code.
– Restart the eBike system.
If the problem persists:
– Acknowledge the error code.
– Perform software update.
– Restart the eBike system.
If the problem persists:
– Please contact a Bosch eBike Systems
specialist dealer.
Maintenance and Service
Maintenance and Cleaning
Do not clean any of the components with pressurised water.
Keep the display of your operating unit clean. Dirt can cause
faulty brightness detection.
Clean your operating unit using a soft cloth dampened only
with water. Do not use cleaning products of any kind.
Note: The Purion 200 operating unit may fog up under cer-
tain temperature and humidity conditions. This is not an er-
ror. Put the eBike in a heated room.
Have your eBike checked by an expert at least once a year
(including mechanical parts, up-to-dateness of system soft-
ware).
In addition, the bicycle dealer may enter the service date
based on the distance travelled and/or on a period of time.
In this case, the operating unit displays a message telling you
when the service date is due each time it is switched on.
Please have your eBike serviced and repaired by an author-
ised bicycle dealer.
Have all repairs performed only by an authorised bike
u
dealer.
Note: If you are handing in your eBike to a bicycle dealer for
maintenance, it is recommended that you temporarily deac-
tivate <Lock & Alarm>.
Note: If you do not use the Purion 200 operating unit for a
long time, recharge it (see "Operating unit power supply",
page English – 3).
0 275 007 3RP | (02.05.2024)
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Further information on the eBike components
and their functions can be found in the Bosch
eBike Help Center.
Disposal and substances in products
You can find information about substances in products at the
following link:
www.bosch-ebike.com/en/material-compliance.
Do not dispose of eBikes and their components with house-
hold waste.
An in-store return is possible, provided the retailer voluntar-
ily offers a return or is legally obligated to do so. Refer to the
national regulations in this case.
The drive unit, on-board computer incl. operat-
ing unit, eBike battery, speed sensor, ac-
cessories and packaging should be disposed of
in an environmentally correct manner.
Check that your personal data has been deleted from the
device.
Batteries that can be removed from the power tool without
destruction must be removed before disposal itself and sor-
ted for separate battery collection.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
Electrical and electronic equipment are collected separately
for pre-sorting by type and helps to ensure that raw materi-
als are treated and recovered properly, thereby protecting
people and the environment.
Subject to change without notice.
Bosch eBike Systems