Electrolux IK225SR Notice D'utilisation page 78

11.
Remove the mounting strips and insert in the
adjacent openings.
13.
13.
Pivot soft stop mechanism to the left.
78
11.
12.
Pull soft stop mechanism downwards.
The soft stop mechanism will then
contract.
14.
Screw the angle brackets onto the underside of the door using
4 x 15 screws.
Push the bracket to the back as far
as it will go, then tighten the screw.
15.
Place the door panel on the adjusting screws and align in the centre.
Screw the nuts onto the adjusting screws and tighten.
To do so, use the ring spanner provided.
12.
15.
16.
Close the door and check the position
of the door panel.
16.