8. Remove the retaining bracket and
9. Screw on the top attachment bracket.
Note
Screw in the screws, push the bracket to the left as
far as it will go, then tighten the screws.
Changing over the hinges of the freezer compartment
door
11.
10. Tilt lower part of the bracket down-
wards.
11. Remove screw.
Remove the compartment door with
the bracket downwards.
8.
transfer to the opposite side.
9.
12. Transfer door latch.
13. Close the openings with the covers (supplied in
the accessory pack).
16.
18.
10.
16. Insert the compartment door in the top left door mounting.
17. Screw on bracket.
18. Close lower part of the bracket.
12.
13.
15.
14. Transfer bracket to the opposite side.
15. Turn the compartment door through 180°.
17.
GB
14.
71