Publicité
Les langues disponibles
Les langues disponibles
Adjusting the resilience of the hinges
(IK225 S / IK227 S only)
The opening resilience of the door can
be adjusted.
- Turn clockwise for stronger resilience.
- Turn anticlockwise for weaker resilience
(factory setting).
Limiting the door opening
angle to 90°
If necessary, limit the maximum door
opening angle to 90°.
Open the door to just under 90°.
Fully insert pins (enclosed in the
accessory pack) in each hinge
in the opening shown.
Important
The pins must be inserted before the appliance is
installed in the recess.
It is not possible to insert the top pin once the appli-
ance has been installed.
Installation options
External door panel
The door panel rests on
the panels of the unit.
Internal door panel
The door panel fits inside the body of
the unit. The front of the unit is visible.
Door panel design
Maximum panel weight IK225, IK 227 = 15 kg
Maximum panel weight IK293 = 19 kg
Dimensions of external door
panel
A = recess height plus overlapping of
the panel at the top and bottom
B = max. 562 mm
C = min. 16 mm
max. 19 mm
Dimensions of internal door
panel
A = max. 1264 mm (IK225, IK 227)
max. 1518 mm (IK293)
B = max. 544 mm
C = min. 16 mm
max. 19 mm
GB
73
Publicité
