Publicité
Les langues disponibles
Les langues disponibles
Installing the appliance
1.
Fit cover profile.
2.
Slide the appliance into the recess.
Route the mains cable towards the
socket.
When sliding in the appliance, make sure
that the mains cable is not damaged.
Installation option with external door panel
A = max. 43 mm
Installation option with internal door panel
A = 43 mm + panel thickness
76
1.
On appliances with
hinges on the right
On appliances with
hinges on the left
2.
3.
Secure the appliance through the hinges using
two 4 x 17 screws per hinge.
4.
• Undo the screws
.
1
• Slide bracket towards the unit wall.
• Tighten the screws
.
1
• Screw in the screws
(4 x 17).
2
3.
3.
4.
Publicité
