Publicité
Les langues disponibles
Les langues disponibles
5.
Remove mounting strips, insert in the
adjacent openings and push
downwards as far as they will go.
Close the door.
5.
6.
Push the mounting strips upwards.
The bottom edge of the mounting strips must be aligned with the
top edge of the adjacent unit door.
Installation option with external door panel
6.
Installation option with internal door panel
6.
7.
Open the door.
Unscrew the retaining bracket with the mount-
ing strips.
To do so, use the ring span-
ner provided.
Important
When removing, ensure that the mounting strips do
not move.
8.
Position the retaining bracket in the middle of the door panel and
secure to the door panel using six 4 x 15 screws.
8.
10.
Attach the retaining plates to the door panel using three 4 x 15
screws per plate.
Important
Fit the unit handle to the panel at this stage.
GB
7.
9.
Slide the cover onto the retain-
ing bracket from the side.
9.
10/6
A = 936 mm
12/6
A = 1190 mm
10.
77
Publicité
