Bio Bronpi Air Série Instructions D'installation, D'utilisation Et D'entretien page 37

Menu
To schedule the stove you have to access to the programming menu
pressing only once the button nº 3 "SET" and with buttons nº 5 or 6
we can move to menu nº 3 "Programme Adjustment" (see drawing
D39).
We need to confirm the access to this programme by pressing
button nº3 "SET".
To see different sub-menus use buttons nº 5 and nº 6.
Sub-menu 03-01- Enable chrono
To programme the stove it is necessary to access to sub-menu 3-1
"Enable chrono" and pressing button nº 3 will show the next screen
(see drawing D40).
By default, in top left margin it shows "off". Touching button nº 1 or nº
2 we are able to change it to "on" to notify to the stove the intention
of programming (see drawing D41).
Right after, we need to choose the set up that we want to introduce:
daily, weekly or weekend. To do so from the previous screen, we
need to press repeatedly buttons nº5 and nº6 until we reach the
desired option.
Submenu 02.02. Daily Programme
To choose the daily program of the stove we need to go to the
following screen (see drawing D42):
By pressing just once button nº3 we are able to access to the daily
programming submenu of the stove. By default, it will show the
following screen (see drawing D43).
We need to change the option "OFF" with "ON" by pressing the
buttons nº1 and nº2 so as to confirm to the machine.
Now we need to choose the hours that we would like the stove to be
switched ON. To do this, there are 2 hours available to start and 2 to
stop the stove: START 1 and STOP 1; START 2 and STOP 2.
For example:
Start at 09:00 hours / stop at 14:30 hours.
Start at 20:30 hours / stop at 23:00 hours.
From the previous screen, we press button nº6 and it will show up
(see drawing D44):
By pressing nº1 and nº2 buttons we modify the value "OFF" and we
set the time of the first start (see drawing D45):
In this same way we can proceed to set the first time to stop (see drawings D46 and D47):
In case you want to set up just one time to start and stop, the options START 2 and STOP 2 should be "OFF".
If you want to set another on and off schedule, introduce the values of the second schedule in the same way that is explained previously. This
way we will have set the diary schedule with two starts hours and two stops hours.
It is also possible to schedule one automatic start hour and manual stop hour (or vice versa).
Example: START 1: 1:08 hours y STOP 00: "off"
or
START 1: "off" and STOP 1: 22:00 hours.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Sub-menu 1. Sub-menu 2.
04- START 2
05- Stop 2
Menu 03
PROGRAMME
SETTING
OFF
M-3-1-01
ENABLE
CHRONO
M - 3 - 2
PROGRAMME
DAY
Off
M - 3 - 2 - 01
PROGRAMME
DAILY
Off
M - 3 - 2 - 02
START 1
DAY
09:00
M - 3 - 2 - 02
START 1
36
Value
Hour
Hour
On
M - 3 - 1 -01
ENABLE
CHRONO
DAY
D39
D40
D41
D42
D43
D44
D45
AIR SERIES