Functions Of The Display's Buttons; General Information Of The Remote Control - Bio Bronpi Air Série Instructions D'installation, D'utilisation Et D'entretien

Drawing D33 shows an example of a stove off.
VALUE
STATE DIALOGUE
Drawing D35 shows the meaning of the symbols appearing on the left hand
side of the screen. The screen lighting in the section "status" shows the
activation of the corresponding device according to the following list.
9.2

FUNCTIONS OF THE DISPLAY'S BUTTONS

Button Description
Increases
1
temperature
Decreases
2
Temperature
Menu (Set)
3
ON/OFF
4
Unblocking
5 Decreases power
6 Increases power
10.3

GENERAL INFORMATION OF THE REMOTE CONTROL

NOTE: The Abril-Ex and Carmen-Ex models do not include a remote control.
The stoves are provided with a remote control by infrared to control your stove
from distance (see drawing D36). Buttons functions are the following:
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
MENU LEVEL
Modality Performance description
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Increases the ambient thermostat temperature value.
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Decreases the ambient thermostat temperature value.
- Access the menu.
MENU Access the following level in the submenu.
PROGRAMMING Confirms the selected value and move to the following option in the menu.
WORKING It switches on or off the stove pressing 2 seconds.
BLOCKING Unblocks the boiler and switches it off.
MENU / PROGRAMMING Goes back to the previous level menu and saves the modified data.
ON/OFF Decreases the output value of the stove.
MENU Moves to the previous menu option.
PROGRAMMING Goes back to the previous submenu value.
ON/OFF Increases the output value of the stove.
MENU Moves to the following menu option.
PROGRAMMING Moves to the following submenu option.
VALUE
STATE
Drawing D34 shows the layout of the messages during the
programming or configuration of the working parameters.
Particularly:
1. The screen area saying "VALUE" shows the value that we
introduce.
2. The screen area saying "MENU LEVEL" shows the current
menu level.
D34
PROGRAMMING ACTIVATED
RESISTOR
AUGER
SMOKE EXTRACTOR
EXCHANGER
CIRCULATOR PUMP (ONLY HYDRO MODELS)
ALARM
33
D32
AMBIENT TEMPERATURE
14:24
21 ºC P-2
OFF
DIALOGUE POWER
D33
D35
D36
AIR SERIES