Button
Description
Increases
1
temperature
Decreases
2
Temperature
ON/OFF
3
Unblocking
4
MENU
5
Decreases power
6
Increases power
NOTE: You can access into menu from the remote control but you have to approach to the display to see its content.
10.4
MENU OPTION
Pressing button nº 3 of display we access the MENU. It is divided into different sections and levels that allow to access the stove
configuration and programming.
The access to the technical menu of the stove is protected by a password. These parameters should be modified only by an authorised
technician. (The changes in these parameters could cause a wrong running in the stove and the subsequent lost of its warranty).
10.4.1
USER MENU
The following table briefly describes the menu structure in the stove. In the attached table, only the options available to the user are specified.
The 01 menu element is disabled in these models.
10.4.2
MENU 1. AUXILIARY FANS
This menu is only available for ductable stoves, because they are
provided with one or two auxiliary fans (depends on model) to
control the working power of the stove independently. It means that
it is possible to configure the operation of both fans separately, to
activate one of them and deactivate the other one; it is also possible
to choose their operation speed independently.
It is possible to configure it pressing button nº 1 to change the values of fan 2, and button nº 3 to do the same with the fan 3 (see drawing
D37). We can set the next values:
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Modality
PROGRAMMING
ON/OFF
PROGRAMMING
ON/OFF
WORKING
BLOCKING
MENU / PROGRAMMING
-
MENU
PROGRAMMING
ON/OFF
MENU
PROGRAMMING
ON/OFF
MENU
PROGRAMMING
Menú
01- Reg. aux. fan
** Only ductable stoves
02 - Clock adjustments
01- Day
02- Hour
03- Minute
04- Day
05- Month
06- Year
03 - Programme setting
** See point 10.4.4.
04 - Select Language
01 - Spanish
02 - Portuguese
03 - Italian
04 - French
05 - English
06 - Catalan
05- Stand-by Mode
06 - Sound mode
07 - Initial load
08 - Stove State
Provides information of the stove status.
09 - Fan Mode
Only on models Carmen and Abril-Ex
Performance description
Modifies/Increases the value of the selected menu.
Increases the ambient thermostat temperature value.
Modifies/Increases the value of the selected menu.
Decreases the ambient thermostat temperature value.
It switches on or off the stove pressing during 2 seconds, as
appropriate.
Unblocks the boiler and switches it off.
Goes back to the previous level menu and saves the modified
data.
Access the menu.
Access the following level in the submenu.
Confirms the selected value and move to the following option in
the menu.
Decreases the output value of the stove.
Moves to the previous menu option.
Goes back to the previous submenu value.
Increases the output value of the stove.
Moves to the following menu option.
Moves to the following submenu option.
Submenu
34
Menu 01
FAN-2
0
FAN-3
A
D37
AIR SERIES