Télécharger Imprimer la page

lamber DSP4-ps Instructions D'emploi page 14

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
AND
MAINTENANCE
PRECAUTION
INSTRUCTIONS
WARNING!
-
the cleaning and maintenance operations,
disconnect the equipment from the mains
power supply:
WARNING!
out cleaning the inside of the machine, make
sure that there are no foreign objects that could
damage the rusty steel inside the tank. The
eventual rust particles could come from non-
stainless steel dishes, from baskets or damaged
water pipes not rust-proof.
During cleaning and maintenance operations is
advisable to wear appropriate clothing, such as
gloves and protectives glasses.
-
Follow the directions on the maitenance in
this guide;
-
Wear protective clothing and gloves when
challenged elements
clearing solution;
WARNING!
-
High temperatures can be reached inside
the machine (90°C). After power supply has been
removed, wait until the machine has reached
room temperature, before working on it.
-
Never leave tools, parts or other loose
material in or on the machine;
-
Chek that there are no rusting foreign
bodies, because of the material "stainless steel"
could begin to rust. Rust particles can come from
non- stainless steel
baskets.
-
Do not wash the machine and the area
surrounding it with fire hydrants, steam jets of
high-pressure cleaners;
-
When clearing the floor be careful not to
saturate the base of the machine, in order to
avoid a prolonged stagnation of water;
PREVENTIVE
AND
CLEANING
: Before carrying out
Before carrying
are impregned with
dishes or damaged wire
-
To clean the inside of the machine, use a
brush or a soft cloth;
-
To clean the machine do not use abrasive
cleaners;
-
BEFORE starting machine or cycle, after
any maintenance or repair work, make sure
all protectives are correctly installed;
DAILY MAINTENANCE
-
Disconnect the machine with pushbutton
"A";
-
Lift the overflow pipe and let the water
drain out of the tank;
WARNING!
(Very high temperatures (90°C) are reached inside the
dishwasher, so it's necessary to wait some minutes
after the end of the washing operations!)
Avoid dipping your naked hands into the soapy hot
water present in the tanks. This can cause burns and
skin irritations. In this case, immediately rinse them with
plenty of water.
WARNING!
to the opening and closing of the door of the
Dish/Glass-washers. Do not use the machine if you
are wearing clothes/items that could get entangles in
the dishwasher parts. As they can limit personnel's
regular moving ability!
-
Wash thoroughly the
housing to remove all impurities;
-
Take the filters out and clean them under
running water;
-
Re-assemble the overflow pipe and the
filters in their housings;
-
Check and clean the washing and the
rinsing jets;
-
Clean the outer surface of the machine by
using a wet sponge; do not use water jets
because, besides being dangerous, they
could damage the electrical parts; do not
use abrasive detergents;
(see page 15-16-17 with images)
-
When the machine is to remain idle for a
long time, drain all the water from
boiler (the drain plug
lower side of the boiler)
electropump. Also leave the
open.
NEVER WASH THE EXTERNAL PART
OF THE MACHINE WITH A WATER JET
Please pay attention
tank and the filter
the
is located on the
and
from the
wash tank

Publicité

loading

Ce manuel est également adapté pour:

Dsp4