Disposal - DS Produkte 00052 Mode D'emploi

EN
Problem
Error message "E02"
or "E05" appears on
the display.
Error message "E03"
appears on the
display.
Error message "E04"
appears on the
display.
The device has
switched off and is not
working.
An unpleasant odour
arises during use.
"0--0" will appear on
the display once the
scale is switched on.

Disposal

The packaging material is recyclable. Dispose of the packaging in an environ-
mentally-friendly manner and make it available to the collection service for re-
cyclable materials.
Dispose of the device in an environmentally-friendly manner. It does not belong
in the household garbage. Dispose of it at a recycling centre for old electrical
and electronic equipment. For more information, please contact the administra-
tion in your community.
48
Potential cause / solution / tips
The cross-blade adapter is blocked, e. g. by too large pieces
or fi ll quantity.
1. Switch the device off with the I / 0 on/off switch.
2. Remove the mixing bowl and open it.
3. Remove the obstacle with the spatula, reduce the fi ll
quantity and/or add some more liquid.
4. Close the mixing bowl, reinsert it and switch the device
on.
• The mixing bowl is open or the lid or steamer adapter
is not locked properly. Correct the position of the mixing
bowl lid/steamer adapter.
• The fan is defective. Contact customer service.
The motor is overheated.
1. Switch the device off with the I / 0 on/off switch.
2. Remove the mixing bowl and open it.
3. Reduce the fi ll quantity and/or add some more liquid.
4. Wait approx. 5 minutes (cool down period).
5. Close the mixing bowl and reinsert it.
6. Switch the device on. If it is still not possible to switch the
device on after the cool down period, contact customer
service.
• Are you using the device for the fi rst time? An odour
often develops when using new devices for the fi rst time.
The odour should disappear once you have used the
device a few times.
• Overloading the motor may, apart from causing the
device to be deactivated by the electronic safety switch,
also produce an odour due to the hot motor. However,
this is absolutely no cause for concern. The device will
be fully operational after the cool down period.
• The device will not display a weight if it is not in a level
position with all feet in a stable position on a surface.
Check the position of the device.