DS Produkte 00052 Mode D'emploi page 35

Removal
Follow the steps on insertion in reverse order:
1. Hold the top end of the cross-blade adapter tight with one hand.
2. Turn the mixing bowl upside down and loosen the wing nut by turning it counterclock-
wise.
3. Pull the cross-blade adapter out of the mixing bowl.
Stirring adapter (butterfl y)
ATTENTION!
Risk of damage to the stirring adapter!
■ The spatula must not be used when the stirring adapter is in use.
■ Do not add any food that could damage or block the stirring adapter when the device
is running. The stirring adapter is not suitable for kneading dough.
The stirring adapter is suitable for whipping cream or egg whites and stirring soups, pud-
ding, sauces, milk rice etc.
35
3. Hold the cross-blade adapter and turn the mixing bowl up-
side down. Tighten the wing nut by turning it clockwise up
to the stop point.
4. Make sure that the cross-blade adapter is securely seated.
• The stirring adapter is fi tted on
the cross-blade adapter with
the wings facing down. It must
lock into place!
• To take it back off, turn it gently
back and forth while pulling it
up and off.
EN