Troubleshooting; Technical Data; Disposal - DS Produkte FP7714 Mode D'emploi

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself. Otherwise contact customer service. Do not attempt to repair a defec-
tive device yourself!
Problem
The device is not
working.

Technical data

Model: FP7714
Product number: Z 08268
Voltage supply: 220 – 240 V~ 50/60 Hz
Output: 150 W
Safety class: II

Disposal

The packaging material can be recycled. Dispose of the packaging in an envi-
ronmentally-friendly manner and make it available for the recyclable material
collection-service.
Dispose of the device in an environmental-friendly manner. The device does
not belong in the household garbage. Dispose of it at a recycling centre for old
electrical and electronic devices. For more information, please contact the ad-
ministration in your community.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
All manuals and user guides at all-guides.com
Potential cause/solution
• Is the plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device correctly assembled? Make sure that the hold-
er for the cutting insert is properly positioned on the drive
shaft.
• Is the device activated? Press the On/Off switch.
22