Technical Data; Troubleshooting - DS Produkte 00052 Mode D'emploi

5. If necessary, wipe the motor unit off with a damp cloth. Dry it off with a soft cloth.
6. You can clean the other accessories in the dishwasher. Clean the sealing rings for the
lid and steamer adapter separately.
7. Let all parts dry completely before reassembling them. Put all sealing rings back in.
8. Store the device in a clean, dry area that is not accessible to children and animals.
NOTE: The plastic parts may discolour with time. However, this is of no concern with
respect to health or the functioning of the device parts.

Technical data

Product number:
Model:
Voltage supply:
Output:
Safety class
Mixing bowl:
Timer:
Speed of the blade:
Temperature setting:
Scale:
Short-time operation:

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
The device is not
working. No indicators
on the display.
Error message "E01"
appears on the
display.
47
00052
HB-FPC-01
220 – 240 V~, 50/60 Hz
max. 1500 W (heating element: 1000 W; motor: 500 W)
I
Non-rusting stainless steel with integrated heater and tempera-
ture sensor, maximum fi lling capacity of 2 litres
up to 60 minutes
10 levels (300 – 6000 rpm)
30 °C to 120 °C
Measurement range 5 – 2500 g in 1 g increments
2 minutes
Potential cause / solution / tips
• Has the mains plug been correctly inserted in the sock-
et? Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• The mixing bowl has not been inserted properly. Insert
it in the receptacle for the mixing bowl and push it down
until it audibly locks into place.
EN