Publicité
Les langues disponibles
Les langues disponibles
Programming the transmitter
The lighting system and the heating element must have sep-
arate master transmitters, i.e. different channels.
The master transmitter refers to the very first transmitter
programmed in a receiver. In contrast to subsequently pro-
grammed transmitters, the master transmitter enables,
among other things, the setting of limit positions (for drives
with integrated radio receiver) and the programming or de-
leting of further transmitters. Any transmitter that has separ-
ate UP, STOP, DOWN buttons and a programming button can
be a master transmitter.
If a transmitter is already programmed in the receiver, press
the programming button of the transmitter for 10 seconds.
Program the master transmitter for the lighting system
a) Putting the radio receiver into programming mode by switching on
the power
Switch on the power.
► The radio receiver remains in programming mode for 3 minutes.
Now press the programming button of the transmitter for 3 seconds whilst in
programming mode.
► The receiver confirms.
Programming is now complete.
b) Putting the radio receiver into programming mode with the program-
ming button
Press the "Lighting system" programming button on the radio receiver for
3 seconds.
► The radio receiver remains in programming mode for 3 minutes.
Now press the programming button of the transmitter for 3 seconds whilst in
programming mode.
► The receiver confirms.
Programming is now complete.
35 - en
Publicité
