Télécharger Imprimer la page

Becker Centronic VarioControl VC210S Notice De Montage Et D'utilisation page 27

Publicité

Les langues disponibles

Les langues disponibles

The radio receivers VC210 und VC310... must only be used for the operation
of LED lighting systems and/or heating elements.
The VC210S must only be used to activate LED lighting systems or heating
elements.
• Please note that radio-controlled systems may not be used in areas with
a high risk of interference (e.g. hospitals, airports).
• The remote control is intended solely for use with equipment and sys-
tems in which malfunctions in the transmitter or receiver would not pose
any risk to persons, animals or property, or which contain safety devices
to eliminate such risks.
• The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
• Only connect radio receivers to devices and systems approved by the
manufacturer.
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
Note that the range of the radio signal is limited by legis-
lation as well as by design.
Intended use
27 - en

Publicité

loading

Ce manuel est également adapté pour:

Centronic variocontrol vc210Centronic variocontrol vc310