Télécharger Imprimer la page

Becker Centronic VarioControl VC210S Notice De Montage Et D'utilisation page 25

Publicité

Les langues disponibles

Les langues disponibles

The radio receiver, delivered ex works, converts radio signals into control sig-
nals. A LED lighting system and/or a heating element can be radio-controlled
using the radio receiver. The radio receiver can be operated by all the trans-
mitters in the Centronic range of control units.
Please follow these Assembly and Operating Instructions when installing and
setting up the device.
Explanation of pictograms
CAUTION
ATTENTION
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g., crush-
ing of limbs. Therefore, structural modifications may only be carried out with
our prior approval and strictly in accordance with our instructions, particularly
the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their inten-
ded use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant
current statutory, official and, in particular, EMC regulations are adhered to
during utilisation of our products, especially with regard to end product manu-
facture, installation and customer advice.
General
CAUTION indicates a hazardous situation
which, if not avoided, could result in in-
jury.
ATTENTION indicates measures that must
be taken to avoid damage to property.
Denotes user tips and other useful in-
formation.
Warranty
25 - en

Publicité

loading

Ce manuel est également adapté pour:

Centronic variocontrol vc210Centronic variocontrol vc310