Publicité
Les langues disponibles
Les langues disponibles
EN
4.8
AUTOSTEAM
SELECTION (Version
with Autosteam)
DANGER OF BURNS OR SCALDS
When using the steam nozzle always take great
care never to place your hands underneath it or
to touch it immediately after use.
This is used to dispense steam for milk-based bever-
ages (e.g. cappuccino or latte).
Place a container with the liquid to be heated
beneath the steam nozzle and press the steam
button
.
Make sure that the button itself lights up.
The nozzle will continue to dispense steam until the
heated liquid reaches the set temperature.
NOTE:
Steam can be dispensed at the same time
as coffee.
WARNING
5.
PROGRAMMING
5.1
PROGRAMMING DOSES
To access the programming units, proceed as fol-
lows:
NOTE:
the procedure can be carried out with the
machine on.
• To enter the programming function for each
group, it is necessary to hold down the continued
delivery key
for 5 seconds.
• The delivery keys will begin to flash.
• Accessing the programming mode for the first
group also enables the setting mode for the
machine's operating parameters.
5.2
PROGRAMMING
COFFEE DOSES
To programme the amount of water for each of the
delivery keys, proceed as follows:
• Fill the filter holder with the right amount of coffee
(the double or single filter holder can be used,
according to the key to be programmed).
• Place the filter holder in the group.
• Press one of the delivery keys:
• The machine will begin to dispense and once the
required quantity has been delivered, press the
continued key
.
• Delivery will cease and the selected dose key will
switch off (the other keys will continue to flash).
• Press the continued key
ming function or to continue programming other
dose keys.
NOTE:
This procedure can be used for all groups
on the machine, although it must be per-
formed on one group at a time; the other
groups will continue to operate as normal.
to exit the program-
39
Publicité
