Publicité
Les langues disponibles
Les langues disponibles
• turn the pump registration screw, turning it clock-
wise to INCREASE and counter clock wise to
DECREASE the pressure.
Advisable pressure:
9 bar.
• The pressure set for the pump will be shown in
the bottom section of the pressure gauge when
coffee is being dispensed.
Once the adjustment operation has been completed,
screw the protective metal sheet back into its setting
and replace the worktop grid cover.
36
3.4
All
water mixer which permits to adjust the water outlet
temperature and to optimize system performance.
To adjust the hot water economiser, it is necessary
to remove the top panel of the machine, proceeding
as follows:
• unscrew the central screw in the upper panel
(Fig. 14);
Fig. 12
• to adjust the temperature of the hot water deliv-
ered from the nozzle, turn the register knob
CLOCKWISE / ANTICLOCKWISE to INCREASE
/ REDUCE the temperature;
Fig. 13
• at the end of this operation, refit the top panel on
the machine.
HOT WATER
ECONOMISER
ADJUSTMENT
models can be equipped with a warm
EN
Fig. 14
Fig. 15
Publicité
