Télécharger Imprimer la page

SilverCrest SV 125 C5 Mode D'emploi page 6

Appareil de mise sous vide
Masquer les pouces Voir aussi pour SV 125 C5:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Package contents and transport inspection
The appliance is supplied with the following components as standard:
Vacuum sealer
1 x film roll
2 x tubes
3 x adapters
1 x replacement sealing ring
These operating instructions
NOTE
Check the package for completeness and for signs of visible damage.
If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the chapter Service).
Unpacking
Remove all parts of the appliance, the tube film and the operating instruc-
tions from the carton.
Remove all packaging material.
Remove the protective film from the control panel.
DANGER
Packaging materials should not be used as a plaything. Risk of suffocation.
Disposal of packaging materials
The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings: 1–7: plastics,
20–22: paper and cardboard, 80–98: composites
NOTE
If possible, keep the original packaging during the warranty period so that the
device can be properly packed for returning in the event of a warranty claim.
SV 125 C5
GB │ IE
 3

Publicité

loading