Télécharger Imprimer la page

SilverCrest SV 125 C5 Mode D'emploi page 10

Appareil de mise sous vide

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Setting up and connecting
Set-up location requirements
For safe and trouble-free operation of the device , the set-up location must fulfil
the following requirements:
When setting it up, place the appliance on a firm, flat and horizontal
surface.
Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials.
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
CAUTION
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
These data must agree so that no damage is sustained by the device.
Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
Ensure that the power cable is not taut or kinked.
Do not let the power cable hang over edges (trip wire effect).
Insert the plug into the mains power socket.
SV 125 C5
GB │ IE
 7

Publicité

loading