Dishwasher Installation
Note: The droin hose supplied
with the dishwosher
is opproximotelg
78" long. tf o longer
hose is needed,
o ZO foot long hose mog be purchosed
from on
outhorized
GE opplionce
deolen The 10 foot long
hose is port number
GPFIOS.
Hose Stop
Do not use
this port if
present
STEP 9: INSERT DRAIN
HOSE AND
POWER
CORD, IF USED, THROUGH
CABINET
• Upright the dishwosher and position it in front of
the cobinet opening.
• Insert the droin hose into the hole previously drilled
in the cobinet woll.
• If o power cord is used, guide the end of the cord
through o seporote hole cut for the power cord.
The power cord should be routed directly to the reor
of the junction
box ovoiding contoct with the door
spring ond other dishwosher components.
Figure M
DrQin Hose
Collection
Chomber
DrQin Port
Tip: Avoid unnecessary
service charges for drain
issues
Moke sure the droin hose connection
is leok free
ond the hose is routed through the stroin relief so
it will not kink when the dishwosher is instolled into
the cobinet.
STEP 8: POSITION WATER LINE AND
POWER SUPPLY
• Position the woter supply line ond house wiring on
the floor of the opening to ovoid interference
with
the bose of dishwosher ond components
under
the dishwosher.
Line
Supplg
Figure N
Figure O
Tip: Avoid unnecessary
service charges for no fill,
drain, or noise concerns
Position utilitg lines so theg do not interfere with
ongthing under or behind the dishwosher.
STEP 10: INSTALL OPTIONAL GPF65 SIDE
MOUNT BRACKETS
Skip this step if the underside of countertop is
wood or wood like material.
• Purchose ond instoll the GPF65 side mount brocket
kit if the underside of counter is gronite or o
similor moteriol thot will not occept wood screws.
The GPF65 kit is ovoiloble from outhorized GE
opplionce deolers.
• Refer to Figure P ond follow the instructions
included in
Side-
the kit.
Tub Frome
Brocket
Attochment
__
Optional
Screws
Side-Mount
(2 Eoch
Bracket Kit
Figure P
Side)