5. Feed excess webbing back
into base and ensure that
lower connector straps are
flush with the base.
ü Check that the lower connector strap is tight, not
twisted, and that the base is secure. The base is
secure when it moves less than 2.5 cm (1 inch)
front-to-back or side-to-side at the vehicle belt path.
ü Recline indicator is still within the correct section
after child is secured.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
Base Installation with LUAS
CHECKLIST
B-SAFE GEN2 User Guide
13